Grip Throttle Assist Wrist Cruise Control Rest Universal Carbon for Motorcycle E-Bike
- List PriceUS$2.19piece
- Sale PriceUS$2.19piece
- ShippingFree Shipping
The use of advanced engineering plastics, light weight, long service life.
High - tech electronic ceramic PTC, rapid heating, anti - overheating.
Rapid melt, automatic energy - saving.
150 watts of power, 3-5 minutes warm-up time is short.
Temperature adjustment between 140-220 ℃.
The diameter of the rod was melted between 10.8 mm and 11.3 mm and between 9 and 16 g / min.
Watts: 150 watts
Nozzle diameter: 2.7-3.0 mm
Glue flow: 9-16 g / min
Frequency: 50-60 HZ
Weight: 390 g
Stick diameter: 10.8-11.3 mm
Toy model making.
Artificial flowers, Chritmas tree.
Decorations, metal products, wood products, cardboard and other crafts.
Electronic circuit boards and so on.
1. The diameter of the gluing bar should be between 10.8 mm and 11.3 mm (if the application rods do not match, the gun may be damaged).
2. Nozzle and glue when the spray gun is very hot liquid, please do not touch.
3. If you do not use glue gun for more than 15 minutes, please cut off the power to avoid melt recycling or damage.
4. The first use may be light smoke, is a normal phenomenon, after 10 minutes will disappear.
5. Allow the stand to cool the gun for a few minutes after use, and then keep the power cord away from the nozzle.
6. If you leave the stick after use, do not pull it down; simply leave it in the glue gun for the next application.
7. It is normal for some glue to finish working after a few seconds due to inertia pressure.
Package includeds :
1 x Hot Melt Glue Gun
10 x Glue Stick
Details pictures :